Home Quadcopter Components
Showing 1–36 of 45 results
Features
Length: 10″.
Pitch: 4.5″.
Weight: 22 gm. (Each pair)
Shaft Diameter: 9 mm.
Total Length: 10 inch / 250 mm.
Material: ABS
Features
Brand: Orange
Material: Glass Fiber Nylon
Color: Grey
No. of Blades: 2
The Orange HD Propellers 1245(12X4.5) Glass Fiber Nylon Gray comes with Epoxy resin cover.
Very strong and lightweight.
Features
Bore Diameter: 3.7mm(expandable up to 4.1mm).
Material: Aluminum.
Color: Silver.
Ease of interfacing.
Rust-free and stain-free aluminum metal construction.
It is used to capture propeller with BLDC motor in quad-copter/multi-rotor/drone.
Features
Length: 5″.
Pitch: 4.5″.
Weight: 22 gm.
Shaft diameter: 5mm.
Total length: 5 inch / 125 mm.
Material: Glass Fiber Nylon
Features
Comes with thin and wide blades
6045(6×4.5) Propellers Black features epoxy resin cover.
It comes with a set of plastic reducers (3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
Quick to release, quick to attach
New design propellers, with greater aerodynamic efficiency, good lifting capacity.
Features
Comes with thin and wide blades
7045(7×4.5) Propellers Black features epoxy resin cover.
It comes with a set of plastic reducers (3, 3.17, 4, 4.70, 5, 6, 6.25 mm).
Quick to release, quick to attach
New design propellers, with greater aerodynamic efficiency, good lifting capacity.
Features
Length: 8″.
Pitch: 4.5″.
Weight: 20 gm.
Shaft Diameter: 9.5mm.
Total Length: 8 inch / 200 mm.
It comes with a set of plastic reducers (3,3.17,4,5,6,8 mm).
Features
Motor KV: 1000
Current Capacity: 12A/ 60S
LiPO Batteries: 2S-3S
Max. Efficiency Current: 4-10A
Shaft Diameter: 3.17 mm
Features
Model: A2212/10T
Motor KV: 1400
Max. Efficiency Current: 6-12A
No Load Current: 0.7A @10V
Current Capacity: 16A/60S
LiPO Batteries: 2S-3S
Features
Model: A2212/6T
Motor KV: 2200
Max. Efficiency Current: 4-10A
No Load Current: 0.5A @10V
Current Capacity: 12A/60S
LiPO Batteries: 2S-3S
Features
• USB on right side
• PPM/PWM input as through-hole
• Flexible motor outputs, support various airframe types:
Quad/Hexa/Tri/Bi/Y4/Y6/Octo/Camera Gimbal. (Default is Quad-X)
• Up to 8 ch RC input – supports standard receivers (PWM), PPM Sum receiver (FrSky, etc), or Spektrum satellite receivers.
• Built in FrSky telemetry inverter
• Battery voltage monitoring
• Modern 32-bit processor running at 3.3V/72MHz (STM32F103CB).
• 3.3V, I2C on standard-size headers
• SBUS Inverter built in
• Spectrum satellite
Features:-
Color: Black
Material: Glass-fiber
Suit for different open-source flight controllers, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
Package Weight: 24 gm.
Features
Model: APM 2.8
Input Voltage (V): 12-16 V.
Processor: ATMEGA2560 and ATMEGA32U-2
Dimensions (mm) LxWxH: 70 x 45 x 15
Features
Material: Brass
Plating: Gold
Size: 3.5mm
Current Rating: 30A
Features
Model: CC3D EVO
Input Voltage:5 V
Sensors: Micro-Controller STM32, MPU6000
Features
Material: plastic and metal (gold plated)
Improved Locking.
Gold Plated Connectors tip.
Color: Red.
High-Quality built and Material.
Good resistance to Temperature & High Amp. Current.
Features
Model: D2826-6
Voltage: 7.2v~11.1v / 2~3s Lipo
Kv: 2200 rpm/v
Shaft Diameter: 3mm
Shaft Length: 10mm
Max Watts: 342W
ESC: 40A
Screw Size: M3
Features
Model: D2826-10
Voltage: 7.2v~11.1v / 2~3s Lipo
Kv: 1400 rpm/v
Shaft Diameter: 3mm
Shaft Length: 10mm
Max Watts: 205W
ESC: 40A
Screw Size: M3
Features
Voltage Rating (V DC)
7.4 – 11.1
Motor KV (RPM/V)
1800
LiPo Batteries
2S-3S
Shaft Diameter x Length (mm)
3.175x37mm
Maximum Pull
820g
Max Power
300 Watt
Suitable ESC
30A
Length (mm)
28
Width (mm)
22
Weight (gm)
50
Features:
Input Voltage: 5V.
Power Consumption: 55mA@ 5v.
Lux: 0.08Lux/ F1.2.
Sensor: 1/3 “CCD.
Format: NTSC/PAL(Free switch).
Resolution: Ultra High Definition 1000TVL.
PAL: 976H X 582V.
NTSC: 976H X 494V.
Lens: 2.8mm IR coated.
FOV: 110 °.
Operating temperature: 0 to 40°C.
Camera size: 28 * 24.5 * 17.5mm.
Len Size: 17mm *14mm.
Net Weight: 10g ( not included the box).
Features:
Based on BL Heli firmware.
ESC Type: Brushless.
Built in linear or switched BEC.
Constant Current: 12A
Burst Current: 15A
BEC Mode: Linear BEC : 5v / 1A
Lipo Cells: 2-4
Constant Current: 12A.
Support: One-shot 125 Protocol.
Includes low voltage protection, over heat protection, and self-check functions.
Features
Made by advanced engineering material, super strong & smooth
Easy to assemble and disassemble.
The frame is tough and durable.
The main glass fiber frame has good strength.
The arm equips support ridges for better and faster forward flight.
Features pre-threaded brass sleeves.
In-built power distribution board.
Features
Model: F550
Frame Weight: 620gm(including landing gear)
Moter Mounting Hole Diameter: 3 mm
Landing Gear Material: ABS
Arm Size: 220 x 55 mm
Landing Gear Length: 200mm
Takeoff weight: 1200-2400 grams
Features
No. of Channel: 6
RF power: less than 20DBm
modulation: GFSK
Code type: PCM
Sensitivity: 1024
Low voltage warning: LED
Features
Model Type: Digital Radio Transceiver.
Sensitivity: 1024.
Bandwidth: 500 kHz.
Default Operating Mode: Mode 2 (Left-Hand Throttle).
No. of Channels: 6.
Operating Voltage: 12V DC (1.5AA x 8 Battery).
Features
Bandwidth (KHz): 500.
RF Range (GHz): 2.40 ~ 2.48.
No. of channels: 6.
Remote controller weight (gm): 400.
Power: 6V (1.5V AA*4).
Antenna Length: 26mm * 2 (dual antenna).
Transmitting Power: ≤ 20dBm.
RF Receiver Sensitivity: -105dbm.
Features
Transmitter: FS-TH9X Upgrade with FS-RM002 2.4GHz Module
Receiver: FS-R9B(8 Channel)
Communication range(Drone to Remote):700m(in open space)
Default Mode: Mode-2
Input Power: 12V DC (1.5V x 8 AAA Battery)
Bidirectional System
Frequencies-Hopping
Omni-directional High Gain Antenna
Low Power Consumption
Features
Input Voltage(AC): 100- 240v
Battery Type: LiPo (Lithium Polymer)
Balance Charge Current: 840mA
Output Current: 3 x 800mA
Power Plug: EU Plug or US Plug
Dimensions: 92*59*35.5mm
Case Material: ABS
Features
Input Voltage: 11~18v
Circuit Power: Max Charge 50W – Max Discharge 5W
Charge Current Range: 0.1~5.0A
Discharge Current Range: 0.1~1.0A
NiMH/NiCd Cells: 1~15
LiIon/LiPoly Cells: 1~6
Pb Battery Voltage: 2~20v
Weight: 277g
Dimensions: 133x87x33mm
B6 Digital LCD RC Lipo NiMh Battery Balance Charger (Blue)
Features
AC 100~240v or 12V DC input
The cables come with a fitted fuse.
Microprocessor controlled
Li-ion, LiPo, and LiFe capable
Input voltage monitoring. (Protects car batteries at the field)
Battery break-in and cycling feature
Data storage (Store up to 5 packs in memory)
Internal resistance checker to see pack health
Delta-peak sensitivity
Individual cell balancing
Features
IC: Atmega644 PA
Gyro/Accelerometer: Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pins.
The signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
LCD size: 24*18mm
Mini buttons size: Four 3.3*4.2mm
Mounting holes: 30.5×30.5mm
Voltage sensor: One red positive pin header for.
Input rail: Single row 2.54mm pitch pin header for input signal
Firmware Version: 1.6
Dimension: 36x36x11.5mm
Features
IC: Atmega644 PA
Gyro/Acc: 6050MPU
Input Voltage: 4.8V~6.0V
AVR Interface: Standard 6 Pin
Signal From Receiver: 1520us(5 channels)
Signal to ESC: 1520 us
Features
Color: black
Material: ABS Plastic
Length: 200mm
Ground Clearance: 150 mm
Compatibility: Q450 and S500 Frames
Weight: 75 (each landing gear)
Features
Input: 1S-8S Battery
Battery type: Lipo/LiFe/Li-ion/LiMn
It has a Buzzer Alarm for low voltage indication.
Useful for measuring each cell voltage.
Cell Voltage Display Range: 0.5v-4.5v
Total Voltage Display Range: 3.7-36v
Alarm set values: Off or 2.7-3.8v
Features
VK: 2280
Max thrust: 460g
No of cells: 2-3S
Framework: 12N14P
Suitable Propeller: 5-6”
Shaft: 2mm
Minimum ESC Specification: 12A Suggested
Durable with high quality
The 0.2mm core to lower load temperature and increase efficiency
Range of use for DJI F330 ZMR250 H250
Do every single motor balancing test
Japan NMB bearings provide low noise and long life
2mm spindle selection of Kawasaki, Japan, more efficient, less heat